How to make Adobe bricks

We are making a fireplace for our house and decided to use Adobe bricks. They use more or less the same mixture as your average cob, but instead of moulding the form using wet cob, you build using bricks which have already dried in the sun.

Adobe bricks are much more commonplace in hot and dry zones, such as the Mediterranean, and parts of central America. With bricks you can build as high as you want in one day, whereas with wet cob you are limited by how quickly the wall starts to slump under its own wet weight. For this reason I believe the hot dry countries take advantage of the drying effect of the sun, and use dry Adobe bricks to build structures.

The process to make bricks is very simple. Firstly you will need your mould. You can make one, two, or even more bricks at a time. The limiting factor really is how many you can pick up at any one time in order to drop the bricks out of the bottom. So first up, cut your wood to size.

When fixing the wood together, you must make sure that each box is as close to square as possible. If they are off even a small amount this will make it difficult for the bricks to slide out of the bottom of the mould when they are ready. Add a couple of handles on the ends to make it easy to lift when full of clay.

Next up, collect your earth, a mix of 75% sand, 25% clay works nicely for us. We crushed up the bigger stones a bit before adding water.

Then add water, until you reach a nice paste consistency.

The mix should be wet enough to easily mould in to a shape, but dry enough to hold its form by itself.

The mould should be wet before starting…

Really throw your mix in to the mould each time, and push it into all the corners to make sure the mould is completely filled out. I prefer to use a slightly wet mix as I can throw it into the mould and it naturally fills all the gaps.

When you are ready, lift the mould firmly to release the adobe bricks. You may need to shake the mould slightly to release the bricks.

Then let them dry in the sun, making sure to cover them if you expect rain, and turn them every day or two to allow for even drying. You should leave your bricks about a week after drying before using them in order that they harden well.

And when you have enough bricks you can start building. It is estimated that an average brick maker can make about 300+ bricks each day, including collecting and preparing the adobe. After about a week of brick making we got to a pace where we could make 150 bricks per 10 hour day, including collecting sand from 50 metres away and clay from 80.

Good luck, have fun, and any questions please email them or leave them in the comments below.

One Comment Add yours

  1. Trevor Keeling says:

    Your skills are endless

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s